Leonhard Kurz will be demonstrating at K2019 a process for in-mold decoration and PUR coating in a single machine pass. The coating manufacturer has developed a process for combining IMD (In-Mold Decoration) with PUR technology. In this process called IMD PUR, plastic parts are decorated during injection moulding by means of in-mould decorating and then over-flooded with PUR (polyurethane) within the same clamping unit.
This produces sophisticated designs under a crystal clear, high-gloss surface. PUR layer thicknesses of between 0.3 and 15 millimeters can be created that exhibit a marked depth effect. Besides a glossy glass appearance, the PUR coating also provides a high level of surface protection. The decoration remains intact when subjected to scratches or stone impact, and the PUR topcoat is self-healing when scratched.
The production and PUR flooding of injection moulded parts in a single machine pass is an existing process. The novelty, however, is in combining this with the IMD process. Kurz has developed IMD coatings that adhere perfectly to the PUR topcoat. The mould manufacturer Schöfer, a member of the Kurz Group, has also tailored the mould technology to the process. Schöfer, with its specialist experience in mould-making, complements Kurz’s comprehensive know-how in thin-layer and process technology. Thanks to the intensive development work undertaken by both parties, it is now possible to perform injection moulding, IMD coating, and PUR coating in a single clamping unit. Furthermore, the tailored formulations of the IMD and PUR layers, as well as process-optimised moulds, ensure significantly reduced cycle times.
The IMD PUR process combines the advantages of the IMD and PUR technologies. Plastic parts decorated by means of IMD PUR exhibit the high surface quality, depth effect, and glassy appearance of PUR coatings. At the same time, IMD PUR offers the great design freedom that is characteristic of IMD technology, with the ability to perform design changeovers both quickly and efficiently. Kurz will be presenting the new IMD PUR process at K 2019 16 – 23 October. At the Kurz booth A19 in Hall 5, an Engel duo 2460/900 injection moulding machine will be producing plastic parts decorated by means of IMD PUR. The production and decoration of components with complex geometries will be demonstrated by way of an automotive front panel.